Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3584 / 3946

Table 469: show mpls lsp Output Fields (continued)
Level of Output Field Description Field Name
detail extensive (Ingress LSP) Received record route. A series of hops, each with an address
followed by a flag. (In most cases, the received record route is the same as the
computed explicit route. If
Received RRO is different from Computed ERO , there
is a topology change in the network, and the route is taking a detour.) The
following flags identify the protection capability and status of the downstream
node:
• 0x01 —Local protection available. The link downstream from this node is
protected by a local repair mechanism. This flag can be set only if the Local
protection flag was set in the
SESSION_ATTRIBUTE object of the
corresponding Path message.
•
0x02 —Local protection in use. A local repair mechanism is in use to maintain
this tunnel (usually because of an outage of the link it was routed over
previously).
•
0x03
—Combination of
0x01
and
0x02
.
•
0x04
—Bandwidth protection. The downstream routing device has a backup
path providing the same bandwidth guarantee as the protected LSP for the
protected section.
• 0x08 —Node protection. The downstream routing device has a backup path
providing protection against link and node failure on the corresponding path
section. If the downstream routing device can set up only a link-protection
backup path, the
Local protection available
bit is set but the
Node protection
bit is cleared.
• 0x09 —Detour is established. Combination of 0x01 and 0x08 .
•
0x10
—Preemption pending. The preempting node sets this flag if a pending
preemption is in progress for the traffic engine LSP. This flag indicates to the
ingress legacy edge router (LER) of this LSP that it should be rerouted.
•
0xb
—Detour is in use. Combination of
0x01
,
0x02
, and
0x08
.
Received RRO
extensive (Ingress LSP) Log entry number of each LSP path event. The numbers are in
chronological descending order, with a maximum of 50 index numbers displayed. Index number
extensive (Ingress LSP) Date of the LSP event. Date
extensive (
Ingress LSP) Time of the LSP event.
Time
extensive (Ingress LSP) Description of the LSP event. Event
extensive
(Ingress LSP) Date and time the LSP was created.
Created
brief detail extensive
(Bypass) RSVP reservation style. This field consists of two parts. The first is the
number of active reservations. The second is the reservation style, which can
be
FF
(fixed filter),
SE
(shared explicit), or
WF
(wildcard filter).
Resv style
brief detail Incoming label for this LSP. Labelin
brief detail
Outgoing label for this LSP.
Labelout
brief detail Name of the LSP. LSPname
Copyright © 2010, Juniper Networks, Inc. 3488
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3