Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3589 / 3946

show route forwarding-table
Syntax show route forwarding-table
<detail | extensive | summary>
<ccc ccc-interface-name>
<destination>
<family family-name>
<label label>
<matching ip_prefix>
<multicast>
<vpn vpn>
Release Information Command introduced in Junos OS Release 9.5 for EX Series switches.
Description Display the Routing Engine's forwarding table, including the network-layer prefixes and
their next hops. This command is used to help verify that the routing protocol process
has relayed the correction information to the forwarding table. The Routing Engine
constructs and maintains one or more routing tables. From the routing tables, the Routing
Engine derives a table of active routes, called the forwarding table.
Options none —Display the routes in the forwarding table.
detail | extensive | summary
—(Optional) Display the specified level of output.
ccc —(Optional) Display the specified circuit cross-connect interface name for entries to
match.
destination —(Optional) Display the destination prefix.
family family-name
—(Optional) Display routing table entries for the specified family:
ethernet-switching
,
inet
,
inet6
,
iso
,
mpls
,
vlan classification
.
label label —(Optional) Display route entries for the specified label name.
matching ip_prefix
—(Optional) Display route entries for the specified IP prefix.
multicast
—(Optional) Display route entries for multicast routes.
vpn vpn —(Optional) Display route entries for the specified VPN.
Required Privilege
Level
view
Related
Documentation
Example: Configuring MPLS on EX Series Switches on page 3365
•
•
Configuring MPLS on Provider Edge Switches (CLI Procedure)
•
Configuring MPLS on Provider Switches (CLI Procedure) on page 3396
List of Sample Output show route forwarding-table on page 3495
show route forwarding-table summary on page 3496
show route forwarding-table extensive on page 3496
3493 Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS