Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2707 / 3946

•
Edit—Specifies 802.1X settings for the selected interface
• Apply 802.1X Profile—Applies an 802.1X profile based on the port role. If a message
appears asking whether you want to configure a RADIUS server, click
Yes .
• 802.1X Configuration—Configures custom 802.1X settings for the selected
interface. If a message appears asking if you want to configure a RADIUS server,
click
Yes
. Enter information as specified in Table 340 on page 2611. To configure
802.1X settings, enter information as specified in Table 342 on page 2611.
• Delete—Deletes 802.1X authentication configuration on the selected interface.
Table 340: RADIUS Server Settings
Your Action Function Field
Enter the IP address in dotted decimal
notation. Specifies the IP address of the server. IP Address
Enter the password. Specifies the login password. Password
Reenter the password. Verifies the login password for the server. Confirm Password
Type the port number. Specifies the port with which the server is associated. Server Port Number
Type the IP address in dotted decimal
notation. Specifies the source address of the switch using which
the switch can communicate with the server. Source Address
Type the number. Specifies the number of login retries allowed after a
login failure. Retry Attempts
Type the interval in seconds. Specifies the time interval to wait before the connection
to the server is closed. Timeout
Table 341: 802.1X Exclusion List
Your Action Function Field
Enter the MAC address. Specifies the MAC address to be excluded from
802.1X authentication. MAC Address
Select to enable the option. Select the port
through which the host is connected. Specifies that the host can bypass authentication
if it is connected through a particular interface. Exclude if connected
through the port
Select to enable the option. Select the
VLAN from the list. Specifies moving the host to a specific VLAN once
the host is authenticated. Move the host to the VLAN
Table 342: 802.1X Port Settings
Your Action Function Field
Supplicant Mode
2611 Copyright © 2010, Juniper Networks, Inc.
Chapter 83: Configuring Access Control