Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3611 / 3946

show rsvp session
Syntax show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<logical-system (all | logical-system-name)>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
Syntax (EX Series
Switch)
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description Display information about Resource Reservation Protocol (RSVP) sessions.
Options none —Display standard information about all RSVP sessions.
brief | detail | extensive | terse
—(Optional) Display the specified level of output.
bidirectional | unidirectional —(Optional) Display information about bidirectional or
unidirectional RSVP sessions only, respectively.
bypass —(Optional) Display RSVP sessions for bypass LSPs.
down | up
—(Optional) Display only LSPs that are inactive or active, respectively.
interface interface-name —(Optional) Display RSVP sessions for the specified interface
only.
logical-system (all | logical-system-name ) —(Optional) Perform this operation on all logical
systems or on a particular logical system.
lsp-type
—(Optional) Display information about RSVP sessions with regard to LSPs:
• bypass
—Sessions used for bypass LSPs.
3515 Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS