Table 23: Upload Package Summary
Your Action
Function
Field
Type the location of the software package, or click
Browse
to navigate to the location.
Specifies the location of the software
package.
File to Upload
(required)
Select the check box if you want the switching
platform to reboot automatically when the upgrade
is complete.
Specifies that the switching platform is
automatically rebooted when the upgrade
is complete.
Reboot If Required
Related
Documentation
Installing Software on an EX Series Switch with a Single Routing Engine (CLI Procedure)
on page 78
•
•
Understanding Software Installation on EX Series Switches on page 69
•
Troubleshooting Software Installation on page 99
Rebooting or Halting the EX Series Switch (J-Web Procedure)
You can use the J-Web interface to schedule a reboot or to halt the switching platform.
To reboot or halt the switching platform by using the J-Web interface:
1.
In the J-Web interface, select
Maintain>Reboot
.
2.
Select one:
•
Reboot Immediately
—Reboots the switching platform immediately.
•
Reboot in number of minutes
—Reboots the switch in the number of minutes from
now that you specify.
•
Reboot when the system time is hour:minute
—Reboots the switch at the absolute
time that you specify, on the current day. You must select a 2-digit hour in 24-hour
format and a 2-digit minute.
•
Halt Immediately
— Stops the switching platform software immediately. After the
switching platform software has stopped, you can access the switching platform
through the console port only.
3.
(Optional) In the Message box, type a message to be displayed to any users on the
switching platform before the reboot occurs.
4.
Click
Schedule
. The J-Web interface requests confirmation to perform the reboot or
halt.
5.
Click
OK
to confirm the operation.
•
If the reboot is scheduled to occur immediately, the switch reboots. You cannot
access the J-Web interface until the switch has restarted and the boot sequence
is complete. After the reboot is complete, refresh the browser window to display
the J-Web interface login page.
85
Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Installing Junos OS
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
