source-address
Syntax
source-address address;
Hierarchy Level
[edit snmp
trap-options
]
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Set the source address of every SNMP trap packet sent by this router to a single address
regardless of the outgoing interface. If the source address is not specified, the default is
to use the address of the outgoing interface as the source address.
Options
address
—Source address of SNMP traps. You can configure the source address of trap
packets two ways:
lo0
or a valid IPv4 address configured on one of the router
interfaces. The value
lo0
indicates that the source address of all SNMP trap packets
is set to the lowest loopback address configured at interface
lo0
.
Default:
disabled (The source address is the address of the outgoing interface.)
Required Privilege
Level
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Related
Documentation
•
Configuring the Source Address for SNMP Traps
Copyright © 2010, Juniper Networks, Inc.
3652
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
