Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2429 / 3946

NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select Commit Options > Commit. See Using the
Commit Options to Commit Configuration Changes for details about all
commit options.
2.
Click one:
• Add —Creates an IGMP snooping configuration for the VLAN.
• Edit —Modifies an IGMP snooping configuration for the VLAN.
• Delete
—Deletes a selected VLAN from the IGMP snooping configuration.
When you are adding or editing an IGMP snooping configuration, enter information as
described in Table 301 on page 2333
3.
Click
OK
to apply changes to the configuration or click
Cancel
to cancel without saving
changes.
To disable IGMP snooping on a VLAN, select the VLAN from the list and click Disable .
Table 301: IGMP Snooping Configuration Fields
Your Action Function Field
Select a VLAN from the list to add it to
the snooping configuration. Specifies the VLAN on which to enable
IGMP snooping. VLAN Name
To enable the option, select the check
box.
To disable the option, clear the check
box.
Immediately removes a multicast group
membership from an interface when it
receives a leave message from that
interface without waiting for any other
IGMP messages to be exchanged
(IGMPv2 only). Immediate Leave
Type a value. Specifies the number of timeout
intervals the switch waits before timing
out a multicast group. Robust Count
2333 Copyright © 2010, Juniper Networks, Inc.
Chapter 77: Configuring IGMP Snooping and Multicast