Table 258: show bgp group Output Fields
Level of
Output
Field Description
Field Name
All levels
Type of BGP group:
Internal
or
External
.
Group type
or
Group
brief detail
none
AS number of the peer. For internal BGP (IBGP), this number is the
same as
Local AS
.
AS
brief detail
none
AS number of the local routing device.
Local AS
brief detail
none
Name of a specific BGP group.
Name
brief detail
none
Flags associated with the BGP group. This field is used by Juniper
Networks customer support.
Flags
brief detail
none
Export policies configured for the BGP group with the
export
statement.
Export
All
Time interval, in seconds, that updates to multiple exit discriminator
(MED) are delayed. Also displays the time remaining before the
interval is set to expire
MED tracks IGP metric update delay
brief detail
none
Total number of peers in the group.
Total peers
All levels
Number of peers in the group that are in the established state.
Established
summary
Multipurpose field that displays information about BGP peer
sessions. The field’s contents depend upon whether a session is
established and whether an established session was established in
the main routing device or in a routing instance.
•
If a peer is not established, the field shows the state of the peer
session:
Active
,
Connect
, or
Idle
.
•
If a BGP session is established in the main routing device, the field
shows the number of active, received, accepted, and damped
routes that are received from a neighbor and appear in the
inet.0
(main) and
inet.2
(multicast) routing tables. For example,
8/10/10/2 and 2/4/4/0
indicate the following:
•
8 active routes, 10 received routes, 10 accepted routes, and 2
damped routes from a BGP peer appear in the
inet.0
routing
table.
•
2 active routes, 4 received routes, 4 accepted routes, and no
damped routes from a BGP peer appear in the
inet.2
routing
table.
Active/Received/Accepted/Damped
All levels
List of peers who are members of the group. The address is followed
by the peer’s port number.
ip-addresses
Copyright © 2010, Juniper Networks, Inc.
2072
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
