Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3357 / 3946

policing
Syntax policing (filter filter-name | no-automatic-policing);
Hierarchy Level [edit protocols mpls label-switched-path lsp-name]
[edit interfaces interface-id unit number-of-logical-unit family inet address ip-address]
Release Information Statement introduced in Junos OS Release 10.1 for EX Series switches.
Description Apply a rate-limiting policer as the specified policing filter:
•
To the LSP for MPLS over CCC.
•
To the customer-edge interface for IP over MPLS.
Options filter filter-name —Specify the name of the policing filter.
no-automatic-policing
—Disable automatic policing on this LSP.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
policer on page 3111
•
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3073
•
Configuring CoS on MPLS Provider Edge Switch Using Circuit Cross-Connect (CLI
Procedure) on page 3223
•
Configuring CoS on MPLS Provider Edge Switch Using IP Over MPLS (CLI Procedure)
on page 3222
3261 Copyright © 2010, Juniper Networks, Inc.
Chapter 112: Configuration Statements for CoS