Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3039 / 3946

user@switch>
show system statistics arp
arp:
198319 datagrams received
45 ARP requests received
12 ARP replies received
2 resolution requests received
2 unrestricted proxy requests
0 restricted proxy requests
0 received proxy requests
0 proxy requests not proxied
0 restricted-proxy requests not proxied
0 with bogus interface
0 with incorrect length
0 for non-IP protocol
0 with unsupported op code
0 with bad protocol address length
0 with bad hardware address length
0 with multicast source address
0 with multicast target address
0 with my own hardware address
168705 for an address not on the interface
0 with a broadcast source address
0 with source address duplicate to mine
29555 which were not for me
0 packets discarded waiting for resolution
4 packets sent after waiting for resolution
27 ARP requests sent
47 ARP replies sent
0 requests for memory denied
0 requests dropped on entry
0 requests dropped during retry
0 requests dropped due to interface deletion
0 requests on unnumbered interfaces
0 new requests on unnumbered interfaces
0 replies for from unnumbered interfaces
0 requests on unnumbered interface with non-subnetted donor
0 replies from unnumbered interface with non-subnetted donor
Meaning The statistics show that two proxy ARP requests were received, and the proxy requests
not proxied field indicates that all the unproxied ARP requests received have been proxied
by the switch.
Related
Documentation
Configuring Proxy ARP (CLI Procedure) on page 1395
•
Verifying That the Port Error Disable Setting Is Working Correctly
Purpose Verify that the port error disable setting is working as expected on MAC limited, MAC
move limited and rate-limited interfaces on an EX Series switch.
Action Display information about interfaces:
user@switch> show ethernet-switching interfaces
Interface State VLAN members Blocking
ge-0/0/0.0 up T1122 unblocked
ge-0/0/1.0 down default MAC limit exceeded
ge-0/0/2.0 down default MAC move limit exceeded
ge-0/0/3.0 down default Storm control in effect
2943 Copyright © 2010, Juniper Networks, Inc.
Chapter 96: Verifying Port Security