Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2104 / 3946

vrrp-inet6-group
Syntax vrrp-inet6-group group-id {
inet6-advertise-interval milliseconds;
preempt {
hold-time seconds;
}
priority number;
virtual-inet6-address ;
virtual-link-local-address
}
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family inet6 address address]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Description Configure a Virtual Router Redundancy Protocol (VRRP) IPv6 group.
Options group-id —VRRP group identifier. If you enable MAC source address filtering on the
interface, you must include the virtual MAC address in the list of source MAC
addresses that you specify in the
source-address-filter
statement. MAC addresses
ranging from
00:00:5e:00:01:00
through
00:00:5e:00:01:ff
are reserved for VRRP,
as defined in RFC 3768. The VRRP group number must be the decimal equivalent
of the last hexadecimal byte of the virtual MAC address.
Range: 0 through 255
The remaining statements are explained separately.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Configuring VRRP for IPv6 (CLI Procedure) on page 1698
Copyright © 2010, Juniper Networks, Inc. 2008
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3