Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3409 / 3946

interface ge-0/0/3 {
priority high;
telemetries;
}
interface ge-0/0/4 {
priority high;
telemetries;
}
}
Verification
To verify that PoE interfaces have been created and are operational, perform the following
tasks:
• Verifying That the PoE Interfaces Have Been Created with the Correct
Priorities on page 3313
Verifying That the PoE Interfaces Have Been Created with the Correct Priorities
Purpose Verify that the PoE interfaces on the switch are now set to the correct priority settings.
Action List all the PoE interfaces configured on the switch:
user@switch>
show poe interface
Interface Admin status Oper status Max power Priority Power consumption Class
ge-0/0/0 Enabled ON 15.4W Low 7.9W 0
ge-0/0/1 Enabled ON 15.4W High 4.8W 0
ge-0/0/2 Enabled ON 15.4W High 4.8W 0
ge-0/0/3 Enabled ON 15.4W High 3.3W 2
ge-0/0/4 Enabled ON 15.4W High 4.7W 2
ge-0/0/5 Enabled ON 15.4W Low 3.2W 2
ge-0/0/6 Enabled ON 15.4W Low 3.3W 2
ge-0/0/7 Enabled ON 15.4W Low 3.3W 2
Meaning The show poe interface command lists PoE interfaces configured on the switch, with
their status, priority, power consumption, and class. This output shows that eight PoE
interfaces are enabled. Interfaces
ge-0/0/1
through
ge-0/0/4
are configured as priority
high
. The remaining PoE interfaces are configured with the default priority value of
low
.
Related
Documentation
•
Example: Configuring PoE Interfaces on an EX Series Switch on page 3307
•
Configuring PoE (CLI Procedure) on page 3315
•
Troubleshooting PoE Interfaces on page 3325
3313 Copyright © 2010, Juniper Networks, Inc.
Chapter 115: Examples: PoE Configuration