Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 498 / 3946

When you commit changes to the configuration, a new configuration file is created that
becomes the active configuration. You can always revert to the factory default
configuration. See “Reverting to the Default Factory Configuration for the EX Series
Switch” on page 427.
The following factory default configuration file is for an EX2200 switch with 24 ports, all
of which have PoE capability:
NOTE: For models that have more than 24 ports, this default configuration
file has more interfaces. For models without PoE, the poe stanza does not
appear. All models have four uplink ports as listed below, ge-0/1/0 to
ge-0/1/3
.
ethernet-switching-options {
storm-control {
interface all {
level 50;
}
}
}
protocols {
igmp-snooping {
vlan all;
}
lldp {
interface all;
}
lldp-med {
interface all;
}
rstp;
}
poe {
interface all;
}
interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/3 {
Copyright © 2010, Juniper Networks, Inc. 402
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3