Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2023 / 3946

priority
Syntax priority number;
Hierarchy Level [edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)] area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id interface
interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)] area area-id interface interface-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the
realm statement introduced in Junos OS Release 9.2.
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series
switches.
Description Specify the routing device’s priority for becoming the designated routing devices. The
routing device that has the highest priority value on the logical IP network or subnet
becomes the network’s designated router. You must configure at least one routing device
on each logical IP network or subnet to be the designated router. You also should specify
a routing device’s priority for becoming the designated router on point-to-point interfaces.
Options
number
—Routing device’s priority for becoming the designated router. A priority value
of 0 means that the routing device never becomes the designated router. A value
of 1 means that the routing device has the least chance of becoming a designated
router.
Range: 0 through 255
Default: 128
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
OSPF Designated Router Overview
•
Configuring the Designated Router Priority for OSPF
1927 Copyright © 2010, Juniper Networks, Inc.
Chapter 73: Configuration Statements for Layer 3 Protocols