
ip
—(Optional) Display Packet Forwarding Engine IPv4 routes.
iso
—(Optional) Display ISO version routing tables.
lcc
number
—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
the slot number of the T640 router (or line-card chassis) that houses the FPC. On
a TX Matrix Plus router, the slot number of the T1600 router (or line-card chassis)
that houses the FPC. Replace
number
with a value from
0
through
3
.
mpls
—(Optional) Display Packet Forwarding Engine Multiprotocol Label Switching
(MPLS) information.
prefix
prefix
—(Optional) IPv4 or IPv6 prefix for which to show table entries.
summary
—(Optional) Display summary of Packet Forwarding Engine information.
table <
table-name>
<index
index
> <prefix
prefix
>
—(Optional) Display table information.
Optionally, specify the table name, index, or prefix.
Required Privilege
Level
admin
List of Sample Output
show pfe route ip on page 859
show pfe route iso on page 859
show pfe route lcc summary (TX Matrix Router) on page 860
show pfe route lcc summary (TX Matrix Plus Router) on page 861
show pfe route ip
user@host>
show pfe route ip
IPv4 Route Table 0, default.0, 0x0:
show pfe route ip
Destination NH IP Addr Type NH ID Interface
--------------------------------- --------------- -------- ----- ---------
default Discard 8
127.0.0.1 127.0.0.1 Local 256
172.16/12 192.168.71.254 Unicast 68 fxp0.0
192.168.0/18 192.168.71.254 Unicast 68 fxp0.0
192.168.40/22 192.168.71.254 Unicast 68 fxp0.0
192.168.64/18 192.168.71.254 Unicast 68 fxp0.0
192.168.64/21 Resolve 67 fxp0.0
192.168.71.249 192.168.71.249 Local 66
192.168.220.0/30 Resolve 303 fe-0/0/0.0
192.168.220.0 192.168.220.0 Receive 301 fe-0/0/0.0
224.0.0.1 Mcast 5
255.255.255.255 Bcast 6
...
show pfe route iso
user@host#
show pfe route iso
CLNS Route Table 0, CLNP.0, 0x0:
Destination Type NH ID Interface
---------------------------------------- -------- ----- ---------
default Reject 60
47.0005.80ff.f800.0000.0108.0001.0102.5508.2159/152 Local 514
49.0001.00a0.c96b.c491/72 Local 536
859
Copyright © 2010, Juniper Networks, Inc.
Chapter 42: Operational Mode Commands for System Monitoring
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
