Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3644 / 3946

}
}
}
ge-0/0/1 {
family ethernet-switching {
filter {
input watch-employee;
}
}
}
}
Verification
To confirm that the configuration is correct, perform these tasks:
• Verifying That the Analyzer Has Been Correctly Created on page 3548
Verifying That the Analyzer Has Been Correctly Created
Purpose Verify that the analyzer named
employee-monitor
or
employee-web-monitor
has been
created on the switch with the appropriate input interfaces, and appropriate output
interface.
Action You can verify the port mirror analyzer is configured as expected using the
show analyzer
command.
user@switch> show analyzer
Analyzer name : employee-monitor
Output interface : ge-0/0/10.0
Mirror ratio : 1
Loss priority : Low
Ingress monitored interfaces : ge-0/0/0.0
Ingress monitored interfaces : ge-0/0/1.0
Egress monitored interfaces : None
Meaning This output shows that the
employee-monitor
analyzer has a ratio of 1 (mirroring every
packet, the default setting), a loss priority of low (set this option to high only when the
analyzer output is to a VLAN), is mirroring the traffic entering the
ge-0/0/0 and ge-0/0/1
interfaces, and sending the mirrored traffic to the ge-0/0/10 interface.
Related
Documentation
Example: Configuring Port Mirroring for Remote Monitoring of Employee Resource Use
on EX Series Switches on page 3549
•
•
Configuring Port Mirroring to Analyze Traffic (CLI Procedure) on page 3555
•
Configuring Port Mirroring to Analyze Traffic (J-Web Procedure) on page 3558
•
Understanding Port Mirroring on EX Series Switches on page 3539
Copyright © 2010, Juniper Networks, Inc. 3548
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3