Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3815 / 3946

Table 498: show services rpm probe-results Output Fields (continued)
Field Description Field Name
(BGP neighbor discovery) Name of the configured (if any) routing instance, logical system name, or
both, in which the probe is configured:
• When a routing instance is defined within a logical system, the logical system name is followed by
the routing instance name. A slash
( / )
is used to separate the two entities. For example, if the
routing instance called R1 is configured within the logical system called LS , the name in the output
field is LS/R1 .
•
When a routing instance is configured but the default logical system is used, the name in the output
field is the name of the routing instance.
• When a logical system is configured but the default routing instance is used, the name in the output
field is the name of the logical system followed by
default
. A slash (
/
) is used to separate the two
entities. For example,
LS/default
.
Routing Instance Name
Raw measurement of a particular probe sample done by a remote host. This data is provided separately
from the calculated results. The following information is contained in the raw measurement:
•
Response received
—Timestamp when the probe result was determined.
•
Client and server hardware timestamps
—If timestamps are configured, an entry appears at this
point.
• Rtt —Average ping round-trip time (RTT), in microseconds.
•
Egress jitter
—Egress jitter, in microseconds.
•
Ingress jitter
—Ingress jitter, in microseconds.
• Round trip jitter —Round-trip jitter, in microseconds.
•
Egress interarrival jitter —Egress interarrival jitter, in microseconds.
•
Ingress interarrival jitter
—Ingress interarrival jitter, in microseconds.
•
Round trip interarrival jitter
—Round-trip interarrival jitter, in microseconds.
Probe results
3719 Copyright © 2010, Juniper Networks, Inc.
Chapter 130: Real-Time Performance Monitoring (RPM)