Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2205 / 3946

Table 267: show isis database Output Fields
Level of Output Field Description Field Name
All levels Name of the interface on which the LSP has been received; always IS-IS for this
command.
Interface name
All levels Level of intermediate system:
• 1 —Intermediate system routes within an area; when the destination is outside
an area, it routes toward a Level 2 system.
•
2 —Intermediate system routes between areas and toward other ASs.
level
All levels Link-state PDU identifier.
LSP ID
All levels Sequence number of the link-state PDU.
Sequence
All levels Checksum value of the link-state PDU. Checksum
All levels Remaining lifetime of the link-state PDU, in seconds.
Lifetime (secs)
none brief Attributes of the specified database: L1 , L2 , Overload , or Attached (L1 only). Attributes
none
brief
Total number of LSPs in the specified link-state database. #
LSPs
detail extensive
Prefix advertised by this link-state PDU.
IP prefix
detail extensive IS-IS neighbor of the advertising system. IS neighbor
detail extensive
(J Series routers only) An ES-IS neighbor of the advertising system.
ES neighbor
detail extensive IPv4 prefix advertised by this link-state PDU. IP prefix
detail extensive
IPv6 prefix advertised by this link-state PDU.
V6 prefix
detail extensive
Metric of the prefix or neighbor.
Metric
extensive • LSP ID —Link state PDU identifier of the header.
• Length —Header length.
•
Allocated Length
—Amount of length available for the header.
•
Router ID
—Address of the local routing device.
• Remaining Lifetime —Remaining lifetime of the link-state PDU, in seconds.
Header
2109 Copyright © 2010, Juniper Networks, Inc.
Chapter 74: Operational Commands for Layer 3 Protocols