Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3851 / 3946

remote-loopback
Syntax remote-loopback;
Hierarchy Level [edit protocols oam ethernet link-fault-management interface interface-name]
Release Information Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description Set the data terminal equipment (DTE) in loopback mode. Remove the statement from
the configuration to take the DTE out of loopback mode. It is used for IEEE 802.3ah
Operation, Administration, and Maintenance (OAM) link fault management (LFM) support.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Example: Configuring Ethernet OAM Link Fault Management on EX Series Switches
on page 3727
•
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
symbol-period
Syntax
symbol-period count;
Hierarchy Level
[edit protocols oam ethernet link-fault-management action-profile profile-name; event
link-event-rate ] ,
[edit protocols oam ethernet link-fault-management interface interface-name
event-thresholds ]
Release Information Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description Configure the threshold for sending symbol period events or taking the action specified
in the action profile.
Symbol code errors occur on the underlying physical layer. The symbol period threshold
is reached when the number of symbol errors reaches the configured value within the
period. You cannot configure the default value to a different value.
Options count —Threshold count in seconds for symbol period events.
Range: 1 through 100 seconds
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3729
3755 Copyright © 2010, Juniper Networks, Inc.
Chapter 131: Ethernet OAM Link Fault Management