Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1778 / 3946

1.
Select
Configure
>
Routing
>
OSPF
.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select Commit Options > Commit. See Using the
Commit Options to Commit Configuration Changes for details about all
commit options.
2.
Click one:
• Add
—Adds an OSPF area. Enter information into the configuration page as described
in Table 235 on page 1682.
• Edit —Modifies an existing OSPF area. Enter information into the configuration page
as described in Table 235 on page 1682.
• Delete
—Deletes an existing OSPF area.
3.
To modify OSPF global settings, click Edit . Enter information as described in Table
236 on page 1684.
4.
To disable OSPF, click Disable .
Table 235: OSPF Routing Configuration Summary
Your Action Function Field
General tab
Type a 32-bit numeric identifier for the area. Type an integer or select and edit
the value.
If you enter an integer, the value is converted to a 32-bit equivalent. For example,
if you enter 3, the value assigned to the area is
0.0.0.3 .
Uniquely identifies the
area within its AS. Area Id
To add a range:
1. Click Add .
2. Type the area range.
3. Specify the subnet mask.
4. To override the metric for the IP address range, type a specific metric value.
5. If you do not want to display the routes that are contained within a summary,
select Restrict advertisements of this area range .
6. If you want a summary of a route to be advertised only when an exact match
is made with the configured summary range, select
Enforce exact match for
advertisement of this area range
.
7. Click
OK
.
To modify an existing area range, select the area range, click Edit , and edit the
value. Click OK .
To delete an area range, select the area range and click Delete .
Specifies a range of IP
addresses for an area
when sending summary
link advertisements
(within an area). Area Ranges
Copyright © 2010, Juniper Networks, Inc. 1682
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3