Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3174 / 3946

Table 390: Policies Global Configuration Parameters (continued)
Your Action Function Field
To add a BGP community:
1. Click Add .
2. Enter a name for the community.
3. To add a community, click
Add
.
4. Enter the community ID and click
OK
.
5. Click OK .
To edit a BGP community, click Edit . Edit the settings and click OK .
To delete a BGP community, select it and click
Delete
.
Specifies a BGP community. BGP
Community
To add an AS path:
1. Click
Add
.
2. Enter the AS path name.
3. Enter the regular expression and click OK .
4. Click OK .
To edit an AS path, click
Edit
. Edit the settings and click
OK
.
To delete an AS path, select it and click Delete .
Specifies an AS path. This is
applicable to BGP only. AS Path
Table 391: Terms Configuration Parameters
Your Action Function Field
Type or select and edit the name. Specifies a term name. Term Name
Source tab
Select a value from the list. Specifies an address family protocol. Family
Select a value from the list. Specifies a routing instance. Routing Instance
Select a value from the list Specifies the name of a routing table. RIB
Type or select and edit the value. Specifies the individual preference value for the route. Preference
Type or select and edit the value. Specifies a metric value. You can specify up to four metric
values. Metric
To add an interface, select Add >
Interface . Select the interface from the
list.
To add an address, select Add > Address .
Select the address from the list.
To remove an interface, select it and click
Remove
.
Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP). Interface
Copyright © 2010, Juniper Networks, Inc. 3078
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3