Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3299 / 3946

2.
Click one:
•
Add
—Adds a code-point alias. Enter information into the code point alias page as
described in Table 413 on page 3203.
• Edit —Modifies an existing code-point alias. Enter information into the code point
alias page as described in Table 413 on page 3203.
• Delete —Deletes an existing code-point alias.
Table 413 on page 3203 describes the related fields.
Table 413: CoS Value Aliases Configuration Fields
Your Action Function Field
Enter a name. Specifies the name for
a code-point—for
example,
af11
or
be
.
Code point name
Select a value. Specifies a code-point
type. The code-point
type can be DSCP or
IP precedence. Code point type
To specify a CoS value, type it in the
appropriate format:
• For DSCP CoS values, use the format xxxxxx,
where x is 1 or 0—for example,
101110
.
• For IP precedence CoS values, use the format
xxx, where x is 1 or 0—for example,
111
.
Specifies the CoS
value for which an
alias is defined.
Changing this value
alters the behavior of
all classifiers that refer
to this alias.
Code point value bits
Related
Documentation
Defining CoS Code-Point Aliases (CLI Procedure) on page 3204
•
•
Monitoring CoS Value Aliases on page 3233
•
Example: Configuring CoS on EX Series Switches on page 3173
3203 Copyright © 2010, Juniper Networks, Inc.
Chapter 109: Configuring CoS