clear multicast bandwidth-admission
Syntax
clear multicast bandwidth-admission
<group group-address>
<inet | inet6>
<instance instance-name>
<interface interface-name>
<source source-address>
Release Information
Command introduced in Junos OS Release 8.3.
Command introduced in Junos OS Release 9.0 for EX Series switches.
inet6
and
instance
options introduced in Junos OS Release 10.0 for EX Series switches.
Description
Reapply IP multicast bandwidth admissions.
Options
none
—Reapply multicast bandwidth admissions for all IPv4 forwarding entries in the
master routing instance.
group
group-address
—(Optional) Reapply multicast bandwidth admissions for the specified
group.
inet
—(Optional) Reapply multicast bandwidth admission settings for IPv4 flows.
inet6
—(Optional) Reapply multicast bandwidth admission settings for IPv6 flows.
instance
instance-name
—(Optional) Reapply multicast bandwidth admission settings for
the specified instance. If you do not specify an instance, the command applies to
the master routing instance.
interface
interface-name
—(Optional) Examines the corresponding outbound interface in
the relevant entries and acts as follows:
•
If the interface is congested, and it was admitted previously, it is removed.
•
If the interface was rejected previously, the
clear multicast bandwidth-admission
command enables the interface to be admitted as long as enough bandwidth
exists on the interface.
•
If you do not specify an interface, issuing the
clear multicast bandwidth-admission
command readmits any previously rejected interface for the relevant entries as
long as enough bandwidth exists on the interface.
To manually reject previously admitted outbound interfaces, you must specify the
interface.
source
source-address
—(Optional) Use with the
group
option to reapply multicast
bandwidth admission settings for the specified (source, group) entry.
Required Privilege
Level
clear
Related
Documentation
show multicast interface on page 2466
•
2429
Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
