Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 361 / 3946

restart
Syntax restart
<adaptive-services | audit-process | chassis-control | class-of-service | dhcp-service |
diameter-service | disk-monitoring | dynamic-flow-capture | ecc-error-logging |
event-processing | firewall | interface-control | ipsec-key-management | kernel-replication
| l2-learning | l2tp-service | lacp | mib-process | pgcp-service | pgm | pic-services-logging
| ppp | pppoe | protected-system-domain-service | redundancy-interface-process |
remote-operations | root-system-domain-service | routing <logical-system
logical-system-name> | sampling | service-deployment | services pgcp gateway
gateway-name |sbc-configuration-process | snmp | usb-control| web-management>
<gracefully | immediately | soft>
Syntax (EX Series
Switch)
restart
<autoinstallation | chassis-control | class-of-service | database-replication | dhcp |
dhcp-service | diameter-service | dot1x-protocol | ethernet-link-fault-management |
ethernet-switching | event-processing | firewall | general-authentication-service |
interface-control | kernel-replication | l2-learning | lacp | license-service | link-management
| lldpd-service | mib-process | mountd-service | multicast-snooping | pgm |
redundancy-interface-process | remote-operations | routing | secure-neighbor-discovery
| service-deployment | sflow-service | snmp | vrrp | web-management>
<gracefully | immediately | soft>
Syntax (TX Matrix
Router)
restart
<adaptive-services | audit-process | chassis-control | class-of-service | dhcp-service |
diameter-service | disk-monitoring | dynamic-flow-capture | ecc-error-logging |
event-processing | firewall | interface-control | ipsec-key-management | kernel-replication
| l2-learning | l2tp-service | lacp | link-management | mib-process |pgm | pic-services-logging
| ppp | pppoe | redundancy-interface-process | remote-operations | routing <logical-system
logical-system-name> | sampling | service-deployment | snmp>
<all-chassis | all-lcc | lcc number | scc>
<gracefully | immediately | soft>
Syntax (TX Matrix Plus
Router)
restart
<adaptive-services | audit-process | chassis-control | class-of-service | dhcp-service |
diameter-service | disk-monitoring | dynamic-flow-capture | ecc-error-logging |
event-processing | firewall | interface-control | ipsec-key-management | kernel-replication
| l2-learning | l2tp-service | lacp | link-management | mib-process | pgm |
pic-services-logging | ppp | pppoe | redundancy-interface-process | remote-operations |
routing <logical-system logical-system-name> | sampling | service-deployment | snmp>
<all-chassis | all-lcc | all-sfc | lcc number | sfc number>
<gracefully | immediately | soft>
Syntax (J Series
Router)
restart
<adaptive-services | audit-process | chassis-control | class-of-service | dhcp | dhcp-service
| dialer-services | diameter-services | dlsw | event-processing | firewall | interface-control
| ipsec-key-management | isdn-signaling | l2ald | l2-learning | l2tp-service | mib-process |
network-access-service | pgm | ppp | pppoe | remote-operations | routing <logical-system
logical-system-name> | sampling | service-deployment | snmp | usb-control |
web-management>
<gracefully | immediately | soft>
Release Information Command introduced before Junos OS Release 7.4.
265 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Operational Mode Commands for System Setup