Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 877 / 3946

Table 133: show chassis fpc Output Fields (continued)
Level of Output Field Description Field Name
none specified Of the total CPU being used by the FPC's processor, the percentage being used
for interrupts. Interrupt CPU
Utilization (%)
none specified Total DRAM, in megabytes, available to the FPC's processor. Memory DRAM
(MB)
none specified Percentage of heap space (dynamic memory) being used by the FPC's processor.
If this number exceeds 80 percent, there may be a software problem (memory
leak).
Heap Utilization
(%)
none specified Percentage of buffer space being used by the FPC's processor for buffering
internal messages.
Buffer Utilization
(%)
detail
Amount of DRAM available to the FPC's CPU.
Total CPU DRAM
detail
Amount of reduced latency dynamic random access memory (RLDRAM)
available to the FPC CPU.
Total RLDRAM
detail Amount of double data rate dynamic random access memory (DDR DRAM)
available to the FPC CPU. Total DDR DRAM
detail Amount of static RAM (SRAM) used by the FPC's CPU. Total SRAM
detail
Total amount of memory used for storing packets and notifications.
Total SDRAM
detail I/O Manager version number, manufacturer, and part number. I/O Manager ASICs
information
detail
Time when the Routing Engine detected that the FPC was running.
Start time
detail How long the Routing Engine has been connected to the FPC and, therefore,
how long the FPC has been up and running. Uptime
none specified ( pic-status output only) Type of PIC. PIC type
show chassis fpc (M10
Router)
user@host>
show chassis fpc
FPC status:
Temp
show chassis fpc (M10
Router)
Slot State (C)
0 Online 27
1 Online 28
show chassis fpc (M20
Router)
user@host> show chassis fpc
FPC status:
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Empty 0 0 0 0 0 0
1 Online 38 0 0 8 0 4
2 Online 35 0 0 8 0 3
3 Empty 0 0 0 0 0 0
781 Copyright © 2010, Juniper Networks, Inc.
Chapter 42: Operational Mode Commands for System Monitoring