Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2580 / 3946

show multicast scope
Syntax show multicast scope
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switch)
show multicast scope
<inet | inet6>
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches.
Description Display administratively scoped IP multicast information.
Options none —Display standard information about administratively scoped multicast information
for all supported address families in all routing instances.
inet | inet6 —(Optional) Display scoped multicast information for IPv4 or IPv6 family
addresses, respectively.
instance instance-name
—(Optional) Display administratively scoped information for a
specific multicast instance.
logical-system (all | logical-system-name )
—(Optional) Perform this operation on all logical
systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show multicast scope on page 2485
show multicast scope inet on page 2485
show multicast scope inet6 on page 2485
Output Fields Table 322 on page 2484 describes the output fields for the
show multicast scope
command.
Output fields are listed in the approximate order in which they appear.
Table 322: show multicast scope Output Fields
Field Description Field Name
Name of the multicast scope.
Scope name
Range of multicast groups that are scoped. Group Prefix
Interface that is the boundary of the administrative scope.
Interface
Number of kernel resolve rejects.
Resolve Rejects
Copyright © 2010, Juniper Networks, Inc. 2484
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3