Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2531 / 3946

clear pim register
Syntax clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switch)
clear pim register
<inet | inet6>
<instance instance-name>
<interface interface-name>
Release Information Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0 for EX Series switches.
inet6 and instance options introduced in Junos OS Release 10.0 for EX Series switches.
Description Clear Protocol Independent Multicast (PIM) register message counters.
Options none—Clear PIM register message counters for all family addresses, instances, and
interfaces.
inet | inet6 —(Optional) Clear PIM register message counters for IPv4 or IPv6 family
addresses, respectively.
instance instance-name —(Optional) Clear register message counters for a specific
PIM-enabled routing instance.
interface interface-name
—(Optional) Clear PIM register message counters for a specific
interface.
logical-system (all | logical-system-name )
—(Optional) Perform this operation on all logical
systems or on a particular logical system.
Additional Information The clear pim register command cannot be used to clear the PIM register state on a
backup Routing Engine when nonstop active routing is enabled.
Required Privilege
Level
clear
Related
Documentation
show pim statistics on page 2512
•
List of Sample Output clear pim register on page 2435
Output Fields When you enter this command, you are provided feedback on the status of your request.
clear pim register
user@host> clear pim register
clear pim register
2435 Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast