Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3188 / 3946

Table 393: Firewall Filter Statements That Are Not Supported by Junos OS for EX Series Switches
Statement Hierarchy Level Statements Not Supported
[edit firewall] • interface-set interface-set-name {
}
• load-balance-group group-name {
}
• three-color-policer name {
}
• logical-interface-policer;
• single-rate {
}
• two-rate {
}
[edit firewall family family-name]
•
prefix-action name {
}
•
prefix-policer {
}
•
service-filter filter-name {
}
•
simple-filter simple-filter-name {
}
[edit firewall family family-name filter filter-name] • accounting-profile name;
[edit firewall policer policer-name] • logical-bandwidth-policer;
• logical-interface-policer;
[edit firewall policer policer-name if-exceeding] bandwidth-percent number;
Related
Documentation
Firewall Filter Match Conditions and Actions for EX Series Switches on page 3009
•
•
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
•
Configuring Firewall Filters (CLI Procedure) on page 3063
•
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3073
•
Firewall Filters for EX Series Switches Overview on page 3001
Copyright © 2010, Juniper Networks, Inc. 3092
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3