Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1335 / 3946

Table 179: show interfaces diagnostics optics Output Fields (continued)
Field Description Field Name
Displays the voltage, in Volts. Module voltage
(Not available for XFP transceivers)
Displays the laser received optical power, in milliwatts (mW) and decibels
referred to 1.0 mW (dBm). Laser rx power
(Not available for SFP and SFP+ transceivers)
Displays the receiver signal average optical power, in milliwatts (mW)
and decibels referred to 1.0 mW (dBm). Receiver signal average optical power
(Not available for XFP transceivers)
Displays whether the laser bias power setting high alarm is On or Off . Laser bias current high alarm
Displays whether the laser bias power setting low alarm is
On
or
Off
.
Laser bias current low alarm
Displays whether the laser bias power setting high warning is
On
or
Off
.
Laser bias current high warning
Displays whether the laser bias power setting low warning is On or Off . Laser bias current low warning
Displays whether the laser output power high alarm is
On
or
Off
.
Laser output power high alarm
Displays whether the laser output power low alarm is On or Off . Laser output power low alarm
Displays whether the laser output power high warning is
On
or
Off
.
Laser output power high warning
Displays whether the laser output power low warning is On or Off . Laser output power low warning
Displays whether the module temperature high alarm is
On
or
Off
.
Module temperature high alarm
Displays whether the module temperature low alarm is
On
or
Off
.
Module temperature low alarm
Displays whether the module temperature high warning is On or Off . Module temperature high warning
Displays whether the module temperature low warning is
On
or
Off
.
Module temperature low warning
Displays whether the module voltage high alarm is On or Off . Module voltage high alarm
(Not available for XFP transceivers)
Displays whether the module voltage low alarm is
On
or
Off
.
Module voltage low alarm
(Not available for XFP transceivers)
Displays whether the module voltage high warning is
On
or
Off
.
Module voltage high warning
(Not available for XFP transceivers)
1239 Copyright © 2010, Juniper Networks, Inc.
Chapter 56: Operational Mode Commands for Interfaces