Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1805 / 3946

Table 246: Summary of Key Routing Information Output Fields (continued)
Additional Information Values Field
If a next hop is listed as Discard , all traffic with that
destination address is discarded rather than routed.
This value generally means that the route is a static
route for which the
discard
attribute has been set.
If a next hop is listed as Reject , all traffic with that
destination address is rejected. This value generally
means that the address is unreachable. For example,
if the address is a configured interface address and the
interface is unavailable, traffic bound for that address
is rejected.
If a next hop is listed as Local , the destination is an
address on the host (either the loopback address or
Ethernet management port 0 address, for example).
Network layer address of the directly reachable
neighboring system (if applicable) and the interface
used to reach it. Next-Hop
How long the route has been active. Age
There are many possible flags. Flags for this route. State
AS path through which the route was learned. The
letters of the AS path indicate the path origin:
• I —IGP.
•
E —EGP.
•
?
—Incomplete. Typically, the AS path was
aggregated.
AS Path
Related
Documentation
•
Configuring Static Routing (J-Web Procedure) on page 1690
•
Configuring Static Routing (CLI Procedure) on page 1690
•
Layer 3 Protocols Supported on EX Series Switches on page 14
1709 Copyright © 2010, Juniper Networks, Inc.
Chapter 72: Verifying Layer 3 Protocols Configuration