Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1791 / 3946

Table 241: Terms Configuration Parameters (continued)
Your Action Function Field
Select
External
.
Select the OSPF type from the list.
Specifies the type of route. Route
Click
Add
. Select the AS path from the
list.
Specifies the name of an AS path regular expression. AS Path
Click Add . Select the community from the
list.
Specifies the name of one or more communities. Community
Destination tab
Select a value from the list. Specifies an address family protocol. Family
Select a value from the list. Specifies a routing instance. Routing Instance
Select a value from the list. Specifies the name of a routing table. RIB
Type a value. Specifies the individual preference value for the route. Preference
Type a value. Specifies a metric value. Metric
To add an interface, select
Add >
Interface . Select the interface from the
list.
To add an address, select
Add > Address
.
Select the address from the list.
To delete an interface, select it and click
Remove
.
Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP). Interface
Click
Add
and select the protocol from
the list.
To delete a protocol, select it and click
Remove
.
Specifies the name of the protocol from which the route was
learned or to which the route is being advertised. Protocol
Action tab
Select a value from the list. Specifies the action to take if the conditions match. Action
Select a value from the list. Specifies that any action that is intrinsic to the protocol is
overridden. This action is also nonterminating, so that various
policy terms can be evaluated before the policy is terminated. Default Action
Select a value from the list. Specifies the default control action if a match occurs, and there
are no further terms in the current routing policy. Next
Select a value from the list. Specifies a priority for prefixes included in an OSPF import
policy. Prefixes learned through OSPF are installed in the
routing table based on the priority assigned to the prefixes. Priority
1695 Copyright © 2010, Juniper Networks, Inc.
Chapter 71: Configuring Layer 3 Protocols