Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3569 / 3946

show link-management te-link
Syntax show link-management te-link
<brief | detail>
<name name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description Display the resources used to set up Multiprotocol Label Switching (MPLS)
traffic-engineered forwarding paths.
Options
none
—Display information for all traffic-engineered links.
brief | detail —(Optional) Display the specified level of output.
name name
—(Optional) Display information for the specified traffic-engineered link only.
Required Privilege
Level
view
Related
Documentation
show link-management on page 3462
•
•
show link-management peer on page 3466
•
show link-management routing on page 3468
•
show link-management statistics on page 3471
List of Sample Output show link-management te-link on page 3474
Output Fields Table 462 on page 3473 describes the output fields for the show link-management te-link
command. Output fields are listed in the approximate order in which they appear.
Table 462: show link-management te-link Output Fields
Field Description Field Name
Traffic-engineered link name. TE link name
State of the traffic-engineered link:
Up
or
Down. State
Identifier of the local side of the link.
Local identifier
Identifier of the remote side of the link. Remote identifier
Address of the local side of the link.
Local address
Address of the remote side of the link. Remote address
Physical layer media type determined by the interfaces contained in the traffic-engineered link. Typical
values include
SDH/SONET
,
Ethernet
,
Packet
, and
PDH
.
Encoding
3473 Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS