Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3854 / 3946

Table 499: show oam ethernet link-fault-management Output Fields (continued)
Level of Output Field Description Field Name
All levels Information about the interface.
•
Remote-Stable
—Indicates remote OAM client acknowledgment of, and
satisfaction with local OAM state information. False indicates that remote
DTE has either not seen or is unsatisfied with local state information. True
indicates that remote DTE has seen and is satisfied with local state
information.
•
Local-Stable —Indicates local OAM client acknowledgment of, and satisfaction
with remote OAM state information. False indicates that local DTE either has
not seen or is unsatisfied with remote state information.
True
indicates that
local DTE has seen and is satisfied with remote state information.
• Remote-State-Valid —Indicates the OAM client has received remote state
information found within Local Information TLVs of received Information
OAM PDUs.
False
indicates that OAM client has not seen remote state
information.
True
indicates that the OAM client has seen remote state
information.
Flags
All levels Indicates the remote loopback status. An OAM entity can put its remote peer
into loopback mode using the Loopback control OAM PDU. In loopback mode,
every frame received is transmitted back on the same port (except for OAM
PDUs, which are needed to maintain the OAM session). Remote loopback
status
All levels Remote entity information.
•
Remote MUX action
—Indicates the state of the multiplexer functions of the
OAM sublayer. Device is forwarding non-OAM PDUs to the lower sublayer or
discarding non-OAM PDUs.
•
Remote parser action
—Indicates the state of the parser function of the OAM
sublayer. Device is forwarding non-OAM PDUs to higher sublayer, looping
back non-OAM PDUs to the lower sublayer, or discarding non-OAM PDUs.
• Discovery mode —Indicates whether discovery mode is active or inactive.
•
Unidirectional mode
—Indicates the ability to operate a link in a unidirectional
mode for diagnostic purposes.
•
Remote loopback mode
—Indicates whether remote loopback is supported
or not supported.
•
Link events
—Indicates whether interpreting link events is supported or not
supported on the remote peer.
• Variable requests —Indicates whether variable requests are supported or not
supported. The Variable Request OAM PDU, is used to request one or more
MIB variables from the remote peer.
Remote entity
information
OAM Receive Statistics
detail
The number of information PDUs received.
Information
detail The number of loopback control PDUs received. Event
detail
The number of variable request PDUs received.
Variable request
detail The number of variable response PDUs received. Variable response
detail
The number of loopback control PDUs received.
Loopback control
Copyright © 2010, Juniper Networks, Inc. 3758
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3