Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1417 / 3946

Figure 30 on page 1321 shows one EX4200 switch that is connected to the three access
switches.
Figure 30: Topology for Configuration
Table 188 on page 1321 explains the components of the example topology. The example
shows how to configure one of the three access switches. The other access switches
could be configured in the same manner.
Table 188: Components of the Topology for Connecting an Access Switch to a Distribution
Switch
Settings Property
EX3200-24P, 24 1-Gigabit Ethernet ports, all PoE-enabled (
ge-0/0/0
through
ge-0/0/23
); one 4-port 1–Gigabit Ethernet uplink module (EX-UM-4SFP)
Access switch hardware
EX4200-24F, 24 1-Gigabit Ethernet fiber SPF ports ( ge-0/0/0 through
ge-0/0/23
); one 2–port 10–Gigabit Ethernet XFP uplink module (EX-UM-4SFP)
Distribution switch hardware
sales
, tag
100
support , tag 200
VLAN names and tag IDs
sales
:
192.0.2.0/25
(addresses
192.0.2.1
through
192.0.2.126
)
support
:
192.0.2.128/25
(addresses
192.0.2.129
through
192.0.2.254
)
VLAN subnets
On the access switch: ge-0/1/0
On the distribution switch: ge-0/0/0
Trunk port interfaces
Avaya IP telephones:
ge-0/0/3
through
ge-0/0/19
Wireless access points:
ge-0/0/0
and
ge-0/0/1
Printers: ge-0/0/22 and ge-0/0/23
File servers:
ge-0/0/20
and
ge-0/0/21
Access port interfaces in VLAN
sales
(on
access switch)
1321 Copyright © 2010, Juniper Networks, Inc.
Chapter 58: Examples: Bridging and VLAN Configuration