Juniper JUNOS OS 10.3 - SOFTWARE, Manual, Page: 206 / 3946

all-lcc
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
reboot all T640 routers (or line-card chassis) connected to the TX Matrix router. On
a TX Matrix Plus router, reboot all T1600 routers (or line-card chassis) connected
to the TX Matrix Plus router.
all-members —(EX4200 switches only) (Optional) Reboot all members of the Virtual
Chassis configuration.
at time
—(Optional) Time at which to reboot the software, specified in one of the following
ways:
•
now —Stop or reboot the software immediately. This is the default.
•
+minutes —Number of minutes from now to reboot the software.
•
yymmddhhmm —Absolute time at which to reboot the software, specified as year,
month, day, hour, and minute.
•
hh:mm
—Absolute time on the current day at which to stop the software, specified
in 24-hour time.
in minutes —(Optional) Number of minutes from now to reboot the software. This option
is an alias for the at +minutes option.
lcc number
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
the number of a T640 router that is connected to the TX Matrix router. On a TX Matrix
Plus router, the number of a T1600 router that is connected to the TX Matrix Plus
router. Replace
number with a value from 0 through 3 .
local
—(EX4200 switches only) (Optional) Reboot the local Virtual Chassis member.
media (compact-flash | disk | removable-compact-flash | usb)
—(Optional) Boot medium
for next boot. (The options
removable-compact-flash
and
usb
pertain to the J Series
routers only.)
media (external | internal) —(EX Series switches only) (Optional) Reboot the boot media:
•
external —Reboot the external mass storage device.
•
internal —Reboot the internal flash device.
member member-id
—(EX4200 switches only) (Optional) Reboot the specified member
of the Virtual Chassis configuration Replace
member-id
with a value from 0 through
9.
message " text "
—(Optional) Message to display to all system users before stopping or
rebooting the software.
other-routing-engine
—(Optional) Reboot the other Routing Engine from which the
command is issued. For example, if you issue the command from the master Routing
Engine, the backup Routing Engine is rebooted. Similarly, if you issue the command
from the backup Routing Engine, the master Routing Engine is rebooted.
Copyright © 2010, Juniper Networks, Inc. 110
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3