Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3176 / 3946

Table 391: Terms Configuration Parameters (continued)
Your Action Function Field
To add an interface, select
Add >
Interface . Select the interface from the
list.
To add an address, select
Add > Address
.
Select the address from the list.
To delete an interface, select it and click
Remove
.
Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP). Interface
Click
Add
and select the protocol from
the list.
To delete a protocol, select it and click
Remove
.
Specifies the name of the protocol from which the route was
learned or to which the route is being advertised. Protocol
Action tab
Select a value from the list. Specifies the action to take if the conditions match. Action
Select a value from the list. Specifies that any action that is intrinsic to the protocol is
overridden. This action is also nonterminating, so that various
policy terms can be evaluated before the policy is terminated. Default Action
Select a value from the list. Specifies the default control action if a match occurs, and there
are no further terms in the current routing policy. Next
Select a value from the list. Specifies a priority for prefixes included in an OSPF import
policy. Prefixes learned through OSPF are installed in the
routing table based on the priority assigned to the prefixes. Priority
Select a value from the list. Specifies the BGP origin attribute. BGP Origin
Enter a value. Affixes an AS number at the beginning of the AS path. The AS
numbers are added after the local AS number has been added
to the path. This action adds an AS number to AS sequences
only, not to AS sets. If the existing AS path begins with a
confederation sequence or set, the affixed AS number is placed
within a confederation sequence. Otherwise, the affixed AS
number is placed with a nonconfederation sequence. AS Path Prepend
Select the type and type a value. Extracts the last AS number in the existing AS path and affixes
that AS number to the beginning of the AS path
n times, where
n is a number from 1 through 32. The AS number is added before
the local AS number has been added to the path. This action
adds AS numbers to AS sequences only, not to AS sets. If the
existing AS path begins with a confederation sequence or set,
the affixed AS numbers are placed within a confederation
sequence. Otherwise, the affixed AS numbers are placed within
a nonconfederation sequence. This option is typically used in
non-IBGP export policies.
AS Path Expand
Copyright © 2010, Juniper Networks, Inc. 3080
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3