Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2101 / 3946

virtual-inet6-address
Syntax virtual-inet6-address [addresses];
Hierarchy Level [edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Description Configure the addresses of the virtual routers in a Virtual Router Redundancy Protocol
(VRRP) IPv6 group. You can configure up to eight addresses.
NOTE: The address of an aggregated Ethernet interface (a LAG) or a routed
VLAN interface (RVI) cannot be assigned as the virtual router address in a
VRRP IPv6 group.
Options
addresses
—Addresses of one or more virtual routers. Do not include a prefix length. If the
address is the same as the interface’s physical address, the interface becomes the
master virtual router for the group.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Configuring VRRP for IPv6 (CLI Procedure) on page 1698
2005 Copyright © 2010, Juniper Networks, Inc.
Chapter 73: Configuration Statements for Layer 3 Protocols