Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2563 / 3946

Table 315: show multicast interface Output Fields (continued)
Field Description Field Name
Amount of bandwidth, in bits per second, used by any mapped flows
that are traversing the interface.
NOTE: Adding the mapped bandwidth deduction value to the local
bandwidth deduction value results in the total deduction value for
the interface.
This field does not appear in the output when the no QoS
adjustment feature is disabled.
Local bandwidth deduction
(bps)
State of the reverse OIF mapping feature (
on
or
off
).
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
Reverse OIF mapping
State of the no QoS adjustment feature (
on
or
off
) for interfaces
that are using reverse OIF mapping.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
Reverse OIF mapping no
QoS adjustment
Amount of time a mapped interface remains active after the last
mapping ends.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
Leave timer
State ( on ) of the no QoS adjustment feature when this feature is
enabled.
NOTE: This field does not appear in the output when the no QoS
adjustment feature is disabled.
No QoS adjustment
show multicast
interface
user@host> show multicast interface
Interface Maximum bandwidth (bps) Remaining bandwidth (bps)
fe-0/0/3 10000000 0
show multicast
interface
fe-0/0/3.210 10000000 –2000000
fe-0/0/3.220 100000000 100000000
fe-0/0/3.230 20000000 18000000
fe-0/0/2.200 100000000 100000000
2467 Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast