Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 950 / 3946

show pfe next-hop
Syntax show pfe next-hop
<interface interface-name>
Syntax (TX Matrix and
TX Matrix Plus router)
show pfe next-hop
<fpc slot>
<interface interface-name>
<lcc number>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display Packet Forwarding Engine next-hop information.
Options
none
—Display all Packet Forwarding Engine next-hop information.
fpc slot —(TX Matrix and TX Matrix Plus router only) (Optional) Show the next hops for
a Flexible PIC Concentrator (FPC) slot.
On a TX Matrix router, if you specify the number of a T640 router by using the
lcc
number option (the recommended method), replace
slot
with a value from
0
through
7
. Otherwise, replace
slot
with a value from
0
through
31
. On a TX Matrix Plus router,
if you specify the number of a T1600 router by using the
lcc
number option (the
recommended method), replace
slot
with a value from
0
through
7
. Otherwise,
replace
slot
with a value from
0
through
31
. For example, the following commands
have the same result:
user@host> show pfe next-hop fpc 1 lcc 1
user@host> show pfe next-hop fpc 9
interface interface-name
—(Optional) Display the Packet Forwarding Engine next-hop
interface.
lcc number
—(TX Matrix and TX Matrix Plus router only) (Optional) On a TX Matrix router,
the slot number of the T640 router (or line-card chassis) that houses the FPC. On
a TX Matrix Plus router, the slot number of the T1600 router (or line-card chassis)
that houses the FPC. Replace
number with a value from 0 through 3 .
Required Privilege
Level
admin
List of Sample Output show pfe next-hop on page 855
show pfe next-hop fpc (TX Matrix Router) on page 855
show pfe next-hop fpc (TX Matrix Plus Router) on page 855
Copyright © 2010, Juniper Networks, Inc. 854
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3