Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1292 / 3946

filter input filter-name;
filter output filter-name;
policer input policer-name;
policer output policer-name;
rpf-check ;
}
family iso
family iso {
address interface-address;
}
family mpls
family mpls;
Hierarchy Level [edit interfaces interface-name unit logical-unit-number]
Release Information Statement introduced in Junos OS Release 9.0 for EX Series switches, including options
ethernet-switching , inet , and iso .
Option
inet6
introduced in Junos OS Release 9.3 for EX Series switches.
Options
ccc
and
mpls
introduced in Junos OS Release 9.5 for EX Series switches.
Description Configure protocol family information for the logical interface on the switch.
Most standard Junos OS configuration statements are available in Junos OS for EX Series
switches. This topic lists standard Junos OS statements that you commonly use when
configuring protocol families for interfaces on EX Series switches as well as statements
that are used to configure protocol families only on switch interfaces. For information
about additional standard Junos OS statements that you can configure on interfaces,
see the
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
.
Default Access interfaces on EX2200, EX3200, EX4200, and EX4500 switches are set to family
ethernet-switching by default. If you are going to change the family setting for an interface,
you might have to delete this default setting or any user-configured family setting before
you change the setting to another family type.
EX8200 switch interfaces do not have a default family setting.
You must configure a logical interface to be able to use the physical device.
Copyright © 2010, Juniper Networks, Inc. 1196
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3