Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1414 / 3946

l3-interface vlan 1;
}
}
TIP: To quickly configure the sales and support VLAN interfaces, issue the
load merge terminal command, then copy the hierarchy and paste it into the
switch terminal window.
Verification
To verify that the “sales” and “support” VLANs have been created and are operating
properly, perform these tasks:
•
Verifying That the VLANs Have Been Created and Associated to the Correct
Interfaces on page 1318
• Verifying That Traffic Is Being Routed Between the Two VLANs on page 1319
• Verifying That Traffic Is Being Switched Between the Two VLANs on page 1319
Verifying That the VLANs Have Been Created and Associated to the Correct
Interfaces
Purpose Verify that the VLANs
sales
and
support
have been created on the switch and that all
connected interfaces on the switch are members of the correct VLAN.
Action List all VLANs configured on the switch:
Use the operational mode commands:
user@switch> show vlans
Name Tag Interfaces
default
ge-0/0/1.0, ge-0/0/2.0, ge-0/0/4.0, ge-0/0/5.0,
ge-0/0/6.0, ge-0/0/7.0, ge-0/0/8.0, ge-0/0/9.0,
ge-0/0/10.0*, ge-0/0/11.0, ge-0/0/12.0, ge-0/0/13.0*,
ge-0/0/14.0, ge-0/0/15.0, ge-0/0/16.0, ge-0/0/17.0,
ge-0/0/18.0, ge-0/0/19.0, ge-0/0/21.0, ge-0/0/23.0*,
ge-0/0/25.0, ge-0/0/27.0, ge-0/0/28.0, ge-0/0/29.0,
ge-0/0/30.0, ge-0/0/31.0, ge-0/0/32.0, ge-0/0/33.0,
ge-0/0/34.0, ge-0/0/35.0, ge-0/0/36.0, ge-0/0/37.0,
ge-0/0/38.0, ge-0/0/39.0, ge-0/0/40.0, ge-0/0/41.0,
ge-0/0/42.0, ge-0/0/43.0, ge-0/0/45.0, ge-0/0/47.0,
ge-0/1/0.0*, ge-0/1/1.0*, ge-0/1/2.0*, ge-0/1/3.0*
sales 100
ge-0/0/0.0*, ge-0/0/3.0, ge-0/0/20.0, ge-0/0/22.0
support 200
ge-0/0/0.24, ge-0/0/26.0, ge-0/0/44.0, ge-0/0/46.0*
mgmt
me0.0*
Copyright © 2010, Juniper Networks, Inc. 1318
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3