Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3607 / 3946

Related
Documentation
Example: Configuring MPLS on EX Series Switches on page 3365
•
•
Configuring MPLS on Provider Edge Switches (CLI Procedure)
•
Configuring MPLS on Provider Switches (CLI Procedure) on page 3396
•
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/junos95/index.html
List of Sample Output show rsvp session on page 3512
show rsvp session statistics on page 3513
show rsvp session detail on page 3513
show rsvp session extensive on page 3513
Output Fields Table 474 on page 3511 describes the output fields for the
show rsvp session
command.
Output fields are listed in the approximate order in which they appear.
Table 474: show rsvp session Output Fields
Level of Output Field Description Field Name
detail
Information about ingress RSVP sessions.
Ingress RSVP
All levels Information about ingress RSVP sessions. Each session has one line of output. Ingress RSVP
All levels Information about egress RSVP sessions.
Egress RSVP
All levels Information about the transit RSVP sessions.
Transit RSVP
All levels Destination (egress switch) of the session. To
All levels Source (ingress switch) of the session.
From
All levels State of the path: Up , Down , or AdminDn . AdminDn indicates that the LSP is
being taken down gracefully.
State
detail
Destination (egress switch) of the LSP.
Address
brief, detail
State of the LSP that is being handled by this RSVP session. It can be either
Up
,
Dn (down), or AdminDn . AdminDn indicates that the LSP is being taken down
gracefully.
LSPstate
brief
Number of active routes (prefixes) that have been installed in the routing table.
For ingress RSVP sessions, the routing table is the primary IPv4 table (
inet.0
).
For transit and egress RSVP sessions, the routing table is the primary MPLS table
mpls.0
).
Rt
detail Number of active routes (prefixes) that have been installed in the forwarding
table. For ingress RSVP sessions, the forwarding table is the primary IPv4 table
(
inet.0 ). For transit and egress RSVP sessions, the forwarding table is the primary
MPLS table ( mpls.0 ).
ActiveRoute
brief, detail
Name of the LSP.
LSPname
3511 Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS