Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1715 / 3946

Related
Documentation
•
show spanning-tree bridge on page 1644
•
show spanning-tree interface on page 1653
•
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
•
Understanding MSTP for EX Series Switches on page 1521
no-root-port
Syntax no-root-port;
Hierarchy Level
[edit protocols mstp interface (all | interface-name)],
[edit protocols rstp interface (all | interface-name)],
[edit protocols stp interface (all | interface-name)],
[edit protocols vstp vlan vlan-id interface (all | interface-name)]
Release Information Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Description Configure an interface to be a spanning tree designated port. If the bridge receives superior
STP bridge protocol data units (BPDUs) on a root-protected interface, that interface
transitions to a root-prevented STP state (inconsistency state) and the interface is
blocked. This blocking prevents a bridge that should not be the root bridge from being
elected the root bridge. When the bridge stops receiving superior STP BPDUs on the
root-protected interface, interface traffic is no longer blocked.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
•
show spanning-tree bridge on page 1644
•
show spanning-tree interface on page 1653
•
Example: Configuring Root Protection to Enforce Root Bridge Placement in Spanning
Trees on EX Series Switches on page 1573
•
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
•
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1527
•
Understanding VSTP for EX Series Switches on page 1525
1619 Copyright © 2010, Juniper Networks, Inc.
Chapter 68: Configuration Statements for Spanning-Tree Protocols