Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3562 / 3946

show link-management peer
Syntax show link-management peer
<name peer-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description Display Multiprotocol Label Switching (MPLS) peer link information.
Options none —Display all peer link information.
name peer-name
—(Optional) Display information for the specified peer only.
Required Privilege
Level
view
Related
Documentation
show link-management on page 3462
•
•
show link-management routing on page 3468
•
show link-management statistics on page 3471
•
show link-management te-link on page 3473
List of Sample Output show link-management peer on page 3467
Output Fields Table 459 on page 3466 describes the output fields for the
show link-management peer
command. Output fields are listed in the approximate order in which they appear.
Table 459: show link-management peer Output Fields
Field Description Field Name
Name of the peer.
Peer Name
Internal identifier for the peer. The range of values is
0
through
64,000
.
System identifier
State of the peer: Up or Down . State
Address to which a control channel is established.
Control address
How often the routing device sends Link Management Protocol (LMP) hello packets. Hello interval
How long LMP waits before declaring the control channel to be dead. This is an interval during which
the routing device receives no LMP hello packets from the neighbor on a control that is active or up.
Hello dead interval
Identifier assigned to the control channel by the local peer. The range of values is
1
through
4,294,967,296
.
CC local ID
Identifier assigned to the control channel by the remote peer. The range of values is 1 through
4,294,967,296
.
CC remote ID
Copyright © 2010, Juniper Networks, Inc. 3466
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3