Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1950 / 3946

martians
Syntax martians {
destination-prefix match-type <allow>;
}
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name],
[edit logical-systems logical-system-name routing-options],
[edit logical-systems logical-system-name routing-options
rib routing-table-name],
[edit routing-instances routing-instance-name routing-options],
[edit routing-instances routing-instance-name routing-options
rib routing-table-name],
[edit routing-options],
[edit routing-options
rib routing-table-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description Configure martian addresses.
Options allow —(Optional) Explicitly allow a subset of a range of addresses that has been
disallowed.
destination-prefix
—Destination route you are configuring:
•
destination-prefix/prefix-length
—
destination-prefix
is the network portion of the IP
address, and
prefix-length
is the destination prefix length.
•
default
—Default route to use when routing packets do not match a network or host
in the routing table. This is equivalent to specifying the IP address
0.0.0.0/0
.
match-type
—Criteria that the destination must match:
•
exact —Exactly match the route’s mask length.
•
longer —The route’s mask length is greater than the specified mask length.
•
orlonger —The route’s mask length is equal to or greater than the specified mask length.
•
through destination-prefix —The route matches the first prefix, the route matches the
second prefix for the number of bits in the route, and the number of bits in the route is
less than or equal to the number of bits in the second prefix.
• upto prefix-length
—The route’s mask length falls between the two destination prefix
lengths, inclusive.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Copyright © 2010, Juniper Networks, Inc. 1854
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3