Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1316 / 3946

sfpplus
Syntax sfpplus {
pic-mode mode;
}
Hierarchy Level [edit chassis fpc slot pic pic-number]
Release Information Statement introduced in Junos OS Release 9.4 for EX Series switches.
Description Configure the operating mode for the specified port on the SFP+ uplink module on the
EX3200 or EX4200 switch.
The remaining statement is explained separately.
Default By default, the SFP+ uplink module operates in the 10-gigabit mode and supports SFP+
transceivers.
NOTE: The SFP+ uplink module provides two ports for 10-gigabit small
form-factor pluggable (SFP+) transceivers when configured to operate in
10-gigabit mode or four ports for 1-gigabit small form-factor pluggable (SFP)
transceivers when configured to operate in 1-gigabit mode.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
•
Setting the Mode on an SFP+ Uplink Module (CLI Procedure) on page 1156
Copyright © 2010, Juniper Networks, Inc. 1220
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3