Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2260 / 3946

show route
Syntax show route
<all>
<destination-prefix>
<logical-system (all | logical-system-name)>
<private>
Syntax (EX Series
Switch)
show route
<all>
<destination-prefix>
<private>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
private option introduced in Junos OS Release 9.5.
private option introduced in Junos OS Release 9.5 for EX Series switches.
Description Display the active entries in the routing tables.
Options none —Display brief information about all active entries in the routing tables.
all
—(Optional) Display information about all routing tables, including private, or internal,
routing tables.
destination-prefix
—(Optional) Display active entries for the specified address or range of
addresses.
logical-system (all | logical-system-name ) —(Optional) Perform this operation on all logical
systems or on a particular logical system.
private —(Optional) Display information only about all private, or internal, routing tables.
Required Privilege
Level
view
List of Sample Output show route on page 2167
show route destination-prefix on page 2167
Output Fields Table 283 on page 2164 describes the output fields for the
show route
command. Output
fields are listed in the approximate order in which they appear.
Table 283: show route Output Fields
Field Description Field Name
Name of the routing table (for example,
inet.0
).
routing-table-name
Number of destinations for which there are routes in the routing table. number destinations
Copyright © 2010, Juniper Networks, Inc. 2164
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3