Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2250 / 3946

show rip neighbor
Syntax show rip neighbor
<instance (all | instance-name)>
<logical-system (all | logical-system-name)>
<name>
Syntax (EX Series
Switch)
show rip neighbor
<instance (all | instance-name)>
<name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display information about Routing Information Protocol (RIP) neighbors.
Options none —Display information about all RIP neighbors for all instances.
instance (all | instance-name )
—(Optional) Display RIP neighbor information for all instances
or for only the specified routing instance.
logical-system (all | logical-system-name )
—(Optional) Perform this operation on all logical
systems or on a particular logical system.
name —(Optional) Display detailed information about only the specified RIP neighbor.
Required Privilege
Level
view
List of Sample Output show rip neighbor on page 2155
Output Fields Table 278 on page 2154 lists the output fields for the
show rip neighbor
command. Output
fields are listed in the approximate order in which they appear.
Table 278: show rip neighbor Output Fields
Field Description Field Name
Name of RIP neighbor.
Neighbor
State of the connection: Up or Dn (Down). State
Source address.
Source Address
Destination address.
Destination Address
Send options: broadcast , multicast , none , or version 1 . Send Mode
Type of packets to accept:
both
,
none
,
version 1
, or
version 2
.
Receive Mode
Metric added to incoming routes when advertising into RIP routes
that were learned from other protocols. In Met
Copyright © 2010, Juniper Networks, Inc. 2154
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3