5.
Configure how long, in seconds, the interface waits before retransmitting the initial
EAPOL PDUs to the supplicant:
[edit protocols dot1x]
user@switch#
set authenticator interface ge-0/0/5
transmit-period
60
6.
Configure the maximum number of times an EAPOL request packet is retransmitted
to the supplicant before the authentication session times out:
[edit protocols dot1x]
user@switch#
set authenticator interface ge-0/0/5
maximum-requests
5
Related
Documentation
Configuring 802.1X Authentication (J-Web Procedure) on page 2610
•
•
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2580
•
Monitoring 802.1X Authentication on page 2633
•
Verifying 802.1X Authentication on page 2634
•
Configuring LLDP (CLI Procedure) on page 2622
•
Understanding Authentication on EX Series Switches on page 2526
Configuring 802.1X Authentication (J-Web Procedure)
To configure 802.1X settings on an EX Series switch using the J-Web interface:
1.
Select
Configure
>
Security
>
802.1X
.
The 802.1X screen displays a list of interfaces, whether 802.1X security has been
enabled, and the assigned port role.
When you select an interface, the
Details of 802.1x configuration on port
section
displays 802.1X details for that interface.
NOTE:
After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select Commit Options > Commit. See Using the
Commit Options to Commit Configuration Changes for details about all
commit options.
2.
Click one:
•
RADIUS Servers—Specifies the RADIUS server to be used for authentication. Select
the check box to specify a server. Click
Add
or
Edit
to add or modify the RADIUS
server settings. Enter information as specified in Table 340 on page 2611.
•
Exclusion List—Excludes hosts from the 802.1X authentication list by specifying the
MAC address. Click
Add
or
Edit
in the Exclusion list screen to include or modify the
MAC addresses. Enter information as specified in Table 341 on page 2611.
Copyright © 2010, Juniper Networks, Inc.
2610
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3
Summary of Contents for JUNOS OS 10.3 - SOFTWARE
