Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3583 / 3946

Table 469: show mpls lsp Output Fields (continued)
Level of Output Field Description Field Name
detail extensive (Ingress LSP) Current value of the actual maximum average bandwidth
utilization, in bps. MaxAvgBW util
detail extensive
(Ingress LSP) Configured value of the threshold overflow limit.
Overflow limit
detail extensive
(Ingress LSP) Current value for the overflow sample count.
Overflow sample
count
detail extensive
(Ingress LSP) Current value of the bandwidth adjustment timer, indicating the
amount of time remaining until the bandwidth adjustment will take place, in
seconds.
Bandwidth
Adjustment in nnn
second(s)
detail extensive
(Ingress LSP) A value of
*
indicates that the path is active. The absence of
*
indicates that the path is not active. In the following example, “long” is the active
path.
*Primary long
Standby short
Active path
indicator
detail extensive (Ingress LSP) Name of the primary path. Primary
detail extensive
(Ingress LSP) Name of the secondary path.
Secondary
detail extensive (Ingress LSP) Name of the path in standby mode. Standby
detail extensive
(Ingress LSP) State of the path:
Up
or
Dn
(down).
State
detail extensive (Ingress LSP) Class-of-service value. COS
detail extensive
(Ingress LSP) Active bandwidth for the LSP path for each MPLS class type, in
bps.
Bandwidth per
class
detail extensive (Ingress LSP) Configured value of the optimize timer, indicating the total amount
of time allowed before path reoptimization, in seconds. OptimizeTimer
detail extensive (Ingress LSP) Configured value of the smart optimize timer, indicating the total
amount of time allowed before path reoptimization, in seconds. SmartOptimizeTimer
detail extensive
(Ingress LSP) Current value of the optimize timer, indicating the amount of time
remaining until the path will be reoptimized, in seconds.
Reoptimization in
xxx seconds
detail extensive (Ingress LSP) Computed explicit route. A series of hops, each with an address
followed by a hop indicator. The value of the hop indicator can be strict (
S ) or
loose ( L ).
Computed ERO (S
[L] denotes strict
[loose] hops)
detail extensive
(Ingress LSP) Constrained Shortest Path First metric for this path.
CSPF metric
3487 Copyright © 2010, Juniper Networks, Inc.
Chapter 126: Operational Mode Commands for MPLS